Recommended Maintenance Schedule

Service # 1

• Check installation of driver’s floor mat.
• Inspect all lights and horn for proper operation.
• Inspect wiper blades, linkage, and washers for proper operation.
• Remove and inspect cabin air filter.
• Check and record tire tread depth. Examine tires for damage and uneven wear.
• Remover wheel and visually inspect brake pads, calipers, rotors, brake lines, and hoses.
• Rotate tires (applicable to same size wheels, front & rear).
• Inspect for leaks – engine oil, brake fluid, differential fluid, transfer case fluid (if equipped), and top-up washer fluid.
• Visually inspect the hybrid battery cooling intake filter (if equipped), and clean if required.
• Remove and inspect engine air filter.
• Record inspection results, measurements, and component condition on inspection form and/or repair order.
• Reset maintenance reminder light or system.

Service # 2

INCLUDES SERVICE #1 PLUS ITEMS BELOW

• Inspect exhaust system for leaks, damage, or broken hangers.
• Check steering gear, linkage, and shock absorbers for looseness, damage, or leakage.
• Inspect ball joints and dust covers, driveshafts, chassis nuts and bolts for looseness or damage.
• Inspect differential and transfer case vents for obstruction.
• Replace engine and oil filter (synthetic 0W16).
• Visually inspect drive belts.
• Lubricate locks, latches, and hinges.

Service # 3

INCLUDES SERVICE #2 PLUS ITEMS BELOW

• Remove brake calipers and/or brake drums. Inspect and measure brake rotors, drums, pads, and shoes.
• Inspect engine oil cooler lines and automatic transmission cooler lines (if equipped) for leakage, looseness, or damage.
• Inspect fuel system for leaks or damage, inspect condition of fuel tank band, fuel tank cap gasket, fuel tank vapor vent system hoses, fuel lines and connections.
• Adjust drive belt tension if required.
• Inspect valve clearance (audibly).
• Perform a 12-volt battery health check.

Brake System Service

-Protects today’s complex ABS system.

Flush entire brake system including master cylinder of old contaminated fluid and replace with new fluid.

Induction System Service – Maintains engine performance, power, and fuel economy. Keep that new car feeling!

• Cleans air intake system including throttle body and plenum.
• Removes carbon deposits from intake valves and pistons.
• Cleans fuel delivery system from tank to injectors.
• Eliminates rough idle and hesitation.
• Improves fuel economy and performance.
• Reduces harmful vehicle emissions.

Cooling System Service – Reduces operation temperature to protect engine and prevent overheating.

• Inspect cooling system for leakage.
• Clean scale and deposits from system.
• Remove all old coolant and replace with new genuine OEM coolant.

Differential Service – Minimizes wear and ensures reliability.

• Inspect differential and axle seals.
• Remove old fluid and replace with new high-quality fluid.
• Specialty fluid and limited slip friction modifier available for an additional fee.